Dispensing Valves
Dispense valves take a direct feed of fluid from a pressure pot or cartridge reservoir. The fluid is fed down flexible plastic fluid lines or feed tubing. The valve remains closed until the lever is pressed manually or the air pulse from the dispenser is made. Use hand lever valves for controlled beads or potting, and air-operated valves for beads, potting and repeat shots.
High speed air-operated dispensing valves for making rapid dots or beads of adhesives, gels, inks, solvents, pastes and many other fluids. The valves are operated by our range of digital controllers either by foot pedal or when linked via an automated assembly line or XYZ robot.
Precision valves dispense accurate deposits of adhesives, solvents, glues, silicones, sealants, pastes, gels, inks, paints, UV cure, lubricants and grease. Direct from syringes, cartridges or pressure pots. Valves will cycle from 500 to 600 times per minute for repeatable and fast bonding, sealing, coating and potting applications. Valves operate with minimal maintenance, ensuring clean and accurate dispensing whether used by hand, fixed on a production line or mounted to an XYZ robot. A typical system includes a dispensing valve, a pressure pot or cartridge reservoir used with a digital smart valve controller.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
High speed air-operated dispensing valves for making rapid dots or beads of adhesives, gels, inks, solvents, pastes and many other fluids. The valves are operated by our range of digital controllers either by foot pedal or when linked via an automated assembly line or XYZ robot.
Precision valves dispense accurate deposits of adhesives, solvents, glues, silicones, sealants, pastes, gels, inks, paints, UV cure, lubricants and grease. Direct from syringes, cartridges or pressure pots. Valves will cycle from 500 to 600 times per minute for repeatable and fast bonding, sealing, coating and potting applications. Valves operate with minimal maintenance, ensuring clean and accurate dispensing whether used by hand, fixed on a production line or mounted to an XYZ robot. A typical system includes a dispensing valve, a pressure pot or cartridge reservoir used with a digital smart valve controller.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
Categories
Pinch tube valves are available as an air operated version that is connected to a dispenser for repeat shots or a manual hand lever version for applying controlled beads direct from a pressure pot. Zero maintenance valves that use heavy duty low cost replaceable pinch tubes. For use with solvents, epoxies, cyanoacrylates, UV cure, inks, primers, activators & adhesives.
Digital controllers run dispense valves for repeat deposits by foot pedal control or externally linked to a PLC or robot. The valve connects to the controller so it can be timed to make dots, beads, potting or spraying. The TS500R controls all valves including air operated, spray & motor driven auger valves. The TS250 & TS350 control all air operated valves but not spray or electric valves.
